Construction work acceptance

☐ Preparation & foundation

Check: axis setting per design, excavation dimensions, base prep (compacted sand/stone), rebar per drawings (diameter, spacing, cover), concrete class on the delivery note.

☐ Walls

Geometry: vertical deviation ≤10 mm per floor, course levelness, bonding, joint thickness, reinforcement/belt where designed, lintels over openings.

☐ Slabs & roof

Slabs: bearing ≥ designed, monolithic sections reinforced. Roof: rafters per design, counter-battens, membrane with taped joints, ventilation gap.

☐ Windows & doors

Installation level, anchoring/plates, continuous foam, vapor/water sealing tapes on joints, hardware adjustment, sills and drips.

☐ Utilities

Electrical: sections per design, RCD on wet zones, panel scheme. Water: pressure test. Sewage: 2–3 cm/m slopes. Heating: pressure test, balancing.

☐ Finishing & acceptance

Wall planes to screeds, no plaster cracks, floors — level and no voids under screed, facade — insulation seal. All with hidden-works acts.

☐ Acceptance documents

Hidden-works acts (rebar, waterproofing, insulation), as-built documentation, contractor warranties per work type, material passports.